Building a new home is different from buying a previously lived-in home. Many people mistakenly assume that because the home is built from the ground up that it is free from defects.
A walk-through with the builder is not enough to learn everything about the condition of the property; you will need an impartial third party inspector to check things for you. The following are some of the benefits of having a home inspection on new construction.
1. An Inspection On New Construction Can Catch Mistakes
Building a home is a complicated process that involves many people. To make it more complex, every subcontractor works on a different system independent of the other components in the house. Given that a lot of the work happens at the same time, it is hard for the builder to constantly check over the work. Even the most skilled and experienced general contractors may miss a slip-up or two.
2. Issues Can be Fixed On Time
If you get a home inspection on new construction before you move in, you can have any issues addressed while the home is still empty and accessible to the contractors. This option is preferable to having workers fixing items in your home when you and your family are living there.
3. Prevent Safety Hazards
Safety and health concerns such as poor ventilation and gas leaks can be caught during an inspection on new construction. This ensures that your home is safe once your family moves in.
4. Resale Value
When you decide to sell your home, the buyer will get the house inspected. Some problems may be found from the original construction phases that could have been remedied if you had an inspection on new construction. It is too late, at this point, to hold the contractor responsible. You will have to take full responsibility for paying for any repairs.
5. Municipal Inspections Should Not Replace Home Inspections
The main reason for municipal inspections is to check for building regulations. Note that the legislated regulations often dictate the bare minimum standards. A municipal code inspection should not be confused with a home inspection for new construction.
6. Phase Inspections
Some of the most common inspection phases are pre-pour, pre-drywall, and pre-final walk-through. Regardless of the number of phases, the goal is usually similar: to spot any defects before they cause significant damage.
Ordering a home inspection on new construction is beneficial in many ways. You will always be glad that any issues were spotted and repaired before you moved into your new home.
Buyers Edge provides home inspections on new construction for Western North Carolina. Contact us to book your inspection.